Used for attaching cross stringers to side stringers. Two Washer Plates (WD-W) are used with each Angle to sandwich lumber and provide a solid connection. Weight: 1.75 LBS
Sold individually.
These longer Angles use two Backup Plates (WD-B) with each Angle to sandwich lumber and provide a solid connection. Weight: 1.75 LBS
Sold individually.
This 8" tall Angle is perfect to use with larger framing. Each 8" Angle is backed by two 8" high Washer Plates (WD-W8). Weight: 3.50 LBS
Sold individually.
5" x 5" x 1/4" Backup Plates are used to backup Single T Female (WD-TF) and Single T Male (WD-TM) connectors. The backup is also used for backing Chain Retainers (WD-CR). Weight: 1.75 LBS
Sold individually.
AMD has created a dock cleat representing the strength of our products. This unique steel Barbell dock cleat will reduce the chance of your dock line slipping off and will set your cleats apart from the standard design. Attaches with 3/8” hex head bolt Total length = 10.5” Weight 3.10...
These are typically bolted to the side of the dock or to a cross stringer and can accommodate up to 1/2" chain to hold the dock in place. Use a WD-B as a backup plate. There is also an XL Chain Retainer available. Weight: 3.75 LBS
Sold individually.
A larger version of the Chain Retainer (WD-CR) that can accommodate up to 1/2" chain. Measures 5" tall with 9/16" slots. Inside dimensions are 4.25" x 3". These are typically bolted to the side of the dock and uses chain to hold the dock in place. Uses a WD-PHCRB as...
Our cleats are made from malleable iron and are hot-dipped galvanized. The 8" steel cleat uses a 5/16" bolt.The 10" and 12" steel cleats use a 3/8" bolt.The 14" steel cleat uses a 1/2" bolt.C-6-M - 6" Steel Cleat - 1.00 LBSC-8-M - 8" Steel Cleat - 1.50 LBSC-10-M - 10"...
Our cleats are made from malleable iron and are hot-dipped galvanized. This is a heavy-duty option compared to standard steel cleats. The 8" and 10" Ship Cleats use a 1/2" bolt, The 12" Ship Cleat uses a 5/8" bolt, and the 15" Ship Cleats use a 3/4" bolt. C-8-SC -...
The Cleat Angle is bolted to the inside of the side stringer and uses a WD-W washer plate as a back up. The cleat is bolted through the deck and through the cleat angle. The slotted holes allow for various size cleats to be used. This cleat assembly ties your...
The XL Cleat Angle is for cleats larger than 12". The Cleat Angle is bolted to the inside of the side stringer and uses a WD-W washer plate as a back up. The cleat is bolted through the deck and through the cleat angle. The slotted holes allow for various...
The Cleat Seat Retractable Dock Cleat is the cleat seat that won’t hurt your feet! The Cleat Seat provides the convenience of a dock cleat without the stubbed toes that often come along with them. This sturdy 6.5 inch x 10 inch dock cleat features a 2.75 inch high cleat...
Our welded truss Finger Deck Stabilizers really add stability to finger docks while providing a safe access onto the dock. Available in 3 ft. or 4 ft. sizes Weight: 48 LBS - 3 ft. Weight: 65 LBS - 4 ft.
+ TRUSS FRAME INFORMATION