ACCESSORIES

ACCESSORIES 21 Products

Auger Auger

$32.35
S-A
Makes the job of anchoring and installing much easier. Made from cast aluminum. Fits with 1 1/2" pipe, and fastens with 3/8" bolt Weight:  1.50 LBS
Mud Pad Mud Pad

$33.60
S-MP
Mud Pad goes on the end of 1.50" Schedule 10 pipe and allows mooring poles to sit on the muddy bottom. Can be used as supports or for extra footing. Sold individually. 

from $23.00
QC-ST QC-RBF
Our fittings take the guesswork out of making handrail. Please call for more options.Galvanized cast iron slip-on fittings for Sch. 40 1.5" pipe (1.5" pipe measures 1.9" O.D.). Inside diameter of these fittings is 2". QC-ST - Short Tee - 1.2 lbs. QC-LT - Long Tee - 2.4 lbs. QC-E -...

from $268.00
L-AP3 L-AP7
Straight lift ladder for a finger pier Available size options range from three to seven steps NOTE: Price changes depending on size selected. > Ladder Dimensions Diagram

from $178.00
L-AT3 L-ATW7
Straight ladder with hoop handles Available size options range from three to seven steps Wide Step options available NOTE: Price changes depending on size selected > Ladder Dimensions Diagram

from $270.00
L-AS3 L-ASW7
Swing Ladder Available size options range from three to seven steps Wide Step options available NOTE: Price changes depending on size selected. > Ladder Dimensions Diagram

from $248.00
L-AL3 L-ALW7
Retractable Lift Ladder Designed to keep your ladder clean and free of marine growth.  When not in use, simply pull up the lower section above the water line to hang on the heavy-duty ladder rung.  Plastic coated lifting cable will provide long lasting service. Available size options range from three...
Ladder Quick Release Set Ladder Quick Release Set

$116.00
L-AFQR
Aluminum quick release set for ladders

from $21.00
C-8-SC C-15-SC
Our cleats are made from malleable iron and are hot-dipped galvanized. This is a heavy-duty option compared to standard steel cleats. The 8" and 10" Ship Cleats use a 1/2" bolt, The 12" Ship Cleat uses a 5/8" bolt, and the 15" Ship Cleats use a 3/4" bolt. C-8-SC -...

from $12.00
C-8-M C-14-M
Our cleats are made from malleable iron and are hot-dipped galvanized.  The 8" Steel Cleat uses a 5/16" bolt, and the 10" and 12" Steel Cleats use a 3/8" bolt. C-6-M - 6" Steel Cleat - 1.00 LBSC-8-M - 8" Steel Cleat - 1.50 LBSC-10-M - 10" Steel Cleat -...

from $22.30
VRR-W01 VRR-B01
10' long rubrail in Style 01 VRR-W01 10 feet - 10 LBS VRR-B01 10 feet - 10 LBS Recommended 30 screws or nails per 10 ft. piece each.

from $30.50
VRR-W02 VRR-B02
10' long rubrail in Style 02 VRR-W02 10 feet - 12 LBS VRR-B02 10 feet - 12 LBS Recommended 30 screws or nails per 10 ft. piece each.

from $40.85
VRR-W08 VRR-B08
10' long rubrail in Style 08 VRR-W08 10 feet - 17 LBS VRR-B08 10 feet - 17 LBS Recommended 30 screws or nails per 10 ft. piece each.

$21.00
VRR-CB VRR-CW
10" x 10" Corner bumper Available in colors Black or White
Float Drum Repair Sticks Float Drum Repair Sticks

$22.00
E-PRS4
These handy Float Drum Repair Sticks makes repairing scratches, gouges, cracks, and small punctures fast and easy. The polyethylene repair sticks offer the same resistance to gas, oil, saltwater, and most chemicals as do our polyethylene float drums. The repair sticks are designed to be used with a standard glue...
Toilet Paper Holder Toilet Paper Holder

$50.00
PR-TPH
Can hold up to three rolls of standard toilet paper Rod & Bracket allow for holder to be locked with any standard lock (lock not included) Backing Plate is pre-drilled to accept fasteners Holder is heavy-duty and meant to deter theft

from $72.00
PR-SBBF PR-SBCF
Simple Bench can be purchased with or without a backrest. The aluminum bench legs sit freestanding on the ground, or our pre-punched holes allow the bench to be fastened securely to any deck or concrete surface. Kit includes aluminum legs and fasteners. Lumber boards NOT included. Please use 2"x6"x4' boards.
Simple Picnic Table Frame Simple Picnic Table Frame

$306.00
PR-SPTF
The Simple Picnic Table is simply our version of an easy-to-assemble table kit frame. Our main emphasis, while designing this frame, was to keep costs down, but offer a table frame that had the strength and accessibility of more expensive tables on the market. Kit is comprised of aluminum table...
Cleat Seat Retractable Dock Cleat Cleat Seat Retractable Dock Cleat

$28.50
C-FD
The Cleat Seat Retractable Dock Cleat is the cleat seat that won’t hurt your feet! The Cleat Seat provides the convenience of a dock cleat without the stubbed toes that often come along with them. This sturdy 6.5 inch x 10 inch dock cleat features a 2.75 inch high cleat...
Barbell Dock Cleat Barbell Dock Cleat

$16.90
C-10-B
AMD has created a dock cleat representing the strength of our products. This unique steel Barbell dock cleat will reduce the chance of your dock line slipping off and will set your cleats apart from the standard design. Attaches with 3/8” hex head bolt  Total length = 10.5” Weight 3.10...

from $675.00
AIR-JS AIR-JFK
The Air-Dock lift is designed specifically for the PWC enthusiast and small watercraft user! Composed of two chambers laced together, our PWC lifts can be adjusted to fit the exact width you need. Internal guide chambers help to center your watercraft as you dock, and our easy-to-use control assembly allows...