Pipe Holders 12 Products

Inside Corner Pipe Holder Inside Corner Pipe Holder

$36.50
WD-INPH3
Can be used to replace a standard inside corner. Has a 3" I.D. pipe welded into the corner providing internal anchoring. Accommodates 2" pipe. Weight:  17 LBS Sold individually. 

from $8.50
WD-PH3S WD-PH3SB
Weight:  13.00 LBS - Split 3 inch Pipe Holder Weight:  4.00 LBS - Backup Plate NOTE: Pipe holder and backup plate must be purchased separately below. They do not come as a pair.

from $6.50
WD-HOPH3 WD-HOPH3B
Weight:  8.00 LBS - 3 inch Pipe Holder Weight:  2.00 LBS - Backup Plate Use with 1-1/2" or 2" Pipe NOTE: Pipe holder and backup plate must be purchased separately below. They do not come as a pair.

from $9.00
WD-PHE3E WD-PHE3EB
Pipe Holder End is designed to allow more fluctuation in water level. Weight:  10.00 LBS - Elongated 3" Pipe Holder End Weight:  4.00 LBS - Backup Plate Use with 1-1/2" or 2" Pipe Sold individually. 

from $11.00
WD-PHE3S WD-PHE3SB
Pipe Holder End is designed to allow more fluctuation in water level. Weight:  10.00 LBS - Elongated 3" Pipe Holder Side Weight:  4.00 LBS - Backup Plate Use with 1-1/2" or 2" Pipe Sold individually. 

from $12.50
WD-PH5 WD-PH5B
Weight:  10.00 LBS - 5 inch Pipe Holder Weight:  4.00 LBS - Backup Plate Use with 3" - 4" O.D. Pipe

from $12.50
WD-PH5S WD-PH5B
Weight:  13.00 LBS - Split 5 inch Pipe Holder Weight:  4.00 LBS - Backup Plate NOTE: Pipe holder and backup plate must be purchased separately below. They do not come as a pair.

from $4.50
WD-PH27 WD-B
Securely attaches your 1.5" pipe upright to the dock framing. Use these and our handrail fittings and 1.5" pipe to make handrail. Pipe sold separately. Weight:  3.00 LBS - Pipe Holder with Set Screws Weight:  1.00 LBS - Backup Plate WD-B Use with 1-1/2" Pipe Sold individually. 
Bracket 4 x 4 Bracket 4 x 4

$38.00
WD-44B
Our 4x4 Bracket attaches a 4x4 wood upright securely to the docks framing. Perfect for handrail. (4x4 post not included) Weight:  5.25 LBS
Steel Truss Pipe Holder 2 inch - Set Screws Steel Truss Pipe Holder 2 inch - Set Screws

$31.00
STF-PH29
These hot-dipped galvanized welded pipe holders (with set screws) are perfect for handrail and bolt directly to the truss frame. Use 1-1/2” pipe and Quick Clamps for handrail. Weight:  10.00 LBS Sold individually. 

from $28.00
STF-PH3 STF-PH5
These hot-dipped galvanized welded pipe holders bolt directly to the truss frame. Uses 3" I.D. pipe for anchoring.  STF-PH3 - 3 inch - 9.7 lbs. STF-PH4 - 4 inch - 11.5 lbs. STF-PH5 - 5 inch - 16 lbs. Sold individually. 

from $71.50
STF-PH3S STF-PH5S
These two-piece hot-dipped galvanized welded pipe holders provide easy installation and removal of your dock. Four hex head bolt sets included. STF-PH3S - 3 inch - 18.88 lbs. STF-PH5S - 5 inch - 21.98 lbs. Sold individually.