Dock Hardware

A metal post passes through a square opening in a wooden dock, surrounded by metal framing and three mounted rollers touching the post. Water is visible on the right.

A stack of welded metal frames with angular shapes, placed on a wooden pallet in an industrial setting.

A metal frame with six white cylindrical rollers, each attached with bolts, sits on a concrete floor.

A metal and rubber roller guide is attached to a wooden dock, positioned around a vertical metal pole above the water.

Close-up of a metal frame with wooden planks partially installed on top, revealing rollers and support structure underneath.

A metal mooring ring with a roller is mounted on a wooden dock, flanked by black and metal corner bumpers.

A wooden dock platform with a hatch door open, revealing a metal ladder leading down, supported by black plastic floats and metal framing. Gravel ground is visible beneath.

Metal pipe brackets and large U-bolts are organized on shelves in an industrial warehouse. Stacks of additional metal components are on the floor in the foreground.

A metal stiff arm attachment connects a floating dock to the shore, providing structural support over the water.

Two T-Female concrete abutment metal brackets with bolts and plates displayed on a wooden surface; parts are sold separately.

Close-up of a wooden dock frame with a metal male/female connector system attached to the corner for finger docks. Text at the bottom reads: Special male/female connection for finger docks.

Metal dock bumper and roller mounted on the edge of a wooden dock platform, with gravel and soil visible below.

Metal frame structure with wooden beams and three gray electrical conduit pipes running through the frame; text reads, CONDUIT FOR ELECTRICAL.

An aluminum ramp cover plate connects a metal walkway to a concrete surface near water, with black railings and rocky ground visible.

Close-up of a low profile metal truss frame structure mounted on black floats, used for dock construction. Text in the image reads LOW PROFILE TRUSS FRAME.

Close-up of two dock sections joined above water with an American Muscle Docks & Fabrication HDG Connector Pin & Clip. Text overlay: Standard Male/Female Connection with F-Pin.

A cylindrical base with alternating tall black and white triangular spikes extending upward, resembling a stylized crown.

Wooden platform with evenly spaced planks and a metal mounting plate attached to the side, featuring bolts and two protruding metal rods.

Close-up of a metal corner with a round hole, wood, and white trim, featuring a hooked latch mechanism and the number 1 marked in orange.

A long steel truss tapered ramp sits on a gravel surface, with stacked black containers in the background.

A close-up view of a large rusted metal pole secured to a wooden dock with a metal bracket and roller, next to murky water.

A wooden board is attached beneath a black floating dock for extra protection; a forklift and snow-covered ground are visible in the background.

A metal pipe holder is attached to the front of a stacked wooden and black plastic storage unit marked “American Muscle.” The text “HO-PH3 PIPE HOLDER SHOWN” is visible.

Close-up of the corner of a wooden dock platform with a galvanized steel support frame, set outdoors with snow in the background.

Stacked rows of metal rods with pointed ends and small holes near each tip, arranged in an orderly manner.

Metal and plastic industrial components are stacked on pallets in an outdoor storage area next to a red building.

Four metal bins containing stacks of bent metal pipes are placed side by side on a rough surface.

Close-up images of wooden dock frame corners showing metal brackets, bolts, and hardware, with American Muscle Docks & Fabrication logo in the bottom left corner.

A stack of white industrial roller assemblies with metal frames arranged on a workbench in a warehouse or workshop.

Wooden Frame Dock with floats and hardware built by American Muscle Docks

dock hardware manufacturing built by American Muscle Docks

Gangway transition ramp 5 series built by American Muscle Docks

Boat dock hardware display built by American Muscle Docks

hoop pile guide custom manufacturing built by American Muscle Docks

Inside dock square pile guide built by American Muscle Docks

Wood floating boat dock with hardware built by American Muscle Docks

Dock Frame with hardware built by American Muscle Docks

Boat Dock Hardware on Floating Dock built by American Muscle Docks

Custom Pipe Brackets built by American Muscle Docks

Dock Hardware Fabrication built by American Muscle Docks

photo of a dock cleat close up built by American Muscle Docks

custom floating dock with wood decking and hinged compartments built by American Muscle Docks

Dock hardware on steel truss floating dock built by American Muscle Docks

Composite dock frame and hardware built by American Muscle Docks

Heavy duty hardware bracket or floating dock built by American Muscle Docks

heavy duty dock frame manufacturing built by American Muscle Docks

AMD plaque on wood dock decking built by American Muscle Docks

heavy duty dock hardware in warehouse on racks built by American Muscle Docks

commercial hardware parts custom fabrication built by American Muscle Docks

mr lifter packed for shipping built by American Muscle Docks

steel truss dock frame with floats heavy duty built by American Muscle Docks

dock hinge in warehouse yard built by American Muscle Docks

heavy duty dock fabrication built by American Muscle Docks

hoop pile heavy duty hardware galvanized built by American Muscle Docks

heavy duty framing custom fabrication built by American Muscle Docks

gangway roller on frame built by American Muscle Docks

heavy duty dock frame with floats made in USA built by American Muscle Docks

metal frame mr lifter pipe track custom built by American Muscle Docks

heavy duty backing plates for boat docks in warehouse container built by American Muscle Docks

marine grade heavy duty hardware for boat docks built by American Muscle Docks

heavy duty floating boat dock parts being fabricated in house built by American Muscle Docks

heavy duty hoop pile guide built by American Muscle Docks

heavy duty hardware custom fabrication built by American Muscle Docks

custom octagon floating dock with railings built by American Muscle Docks

custom hardware fabrication made in USA built by American Muscle Docks

Heavy duty custom built dock framing built by American Muscle Docks

composite floating dock with heay duty hardware built by American Muscle Docks

floating wood doack with heavy duty hardware and rub rails built by American Muscle Docks

custom boat dock hardware fabrication built by American Muscle Docks

heavy duty dock hardware on warehouse shelves built by American Muscle Docks

wooden floating docks stacked in yard built by American Muscle Docks

composite floating dock Nicaragua inside piling built by American Muscle Docks

hoop pile guides on racks and mr lifter pipe track housing built by American Muscle Docks

pile guide hoop on floating composite dock built by American Muscle Docks

kayak dock with candy canes installed on fixed pier built by American Muscle Docks

composite frame dock with inside corner pile guides built by American Muscle Docks

Heavy duty Metal bracket assembly on a wooden pallet built by American Muscle Docks

Pile guide hoops on rack built by American Muscle Docks

heavy duty hardware made in the USA built by American Muscle Docks

square pile guide roller inside dock frame built by American Muscle Docks

Boat lift mechanism on a wooden dock with boats in the background built by American Muscle Docks

pile guide and custom flashing on floating dock built by American Muscle Docks

wood dock floating in the water with cleat and plaque built by American Muscle Docks

piling hoop connector heavy duty on floating dock built by American Muscle Docks

wooden dock professional heavy duty hardware built by American Muscle Docks

composite dock frame with floats sitting in shipping yard built by American Muscle Docks

heavy duty custom dock with recessed piling built by American Muscle Docks

Gangway hinge connector image up close built by American Muscle Docks

mr lifter houseing in warehouse built by American Muscle Docks

heavy duty dock hardware in lot built by American Muscle Docks

hardware inventory heavy duty floating dock parts built in the USA by American Muscle Docks

Dock hardware frame built by American Muscle Docks

Dog standing on a simple dock in a warehouse with heavy duty hardware in the background built by American Muscle Docks

dock flashing on custom dock built by American Muscle Docks

custom floating dock with steps ready for pickup built by American Muscle Docks

Subtotal

Galleries

Dock Hardware

Overview

Featured Images

Your Waterfront Project Starts Here

Galleries

Dock Hardware

Overview

Featured Images

Related Projects

Mr Launcher Kayak Launch Dock

Mr. Lifter - Jet Ski Lift

Ramps + Gangways

Your Waterfront Project Starts Here