All Products 197 Products
from
$1.50
F-PIN34 — F-HC16
Connector Pin and Hitch Clip available in various sizes. Hitch Clip and Flat Washer also sold separately in drop down menu below. F-PIN34 is used with Residential and Standard hardware F-PIN36 is used with Heavy Duty hardware F-PIN34 3/4" x 4" HDG Connector Pin & Hitch Clip F-PIN36 3/4" x...
from
$1.50
PH-BRR — F-HC16
Replacement parts for Pile Guides PH-BRR - 11 1/2" x 3 1/2" Rubber Roller - 3.5 LBS PH-WRP - 11 5/8" x 3 1/8" UHMW Roller - 2.5 LBS PH-RS - HDG Roller Shaft - 5.5 LBS F-HC16 - Galvanized Hitch Clip - 0.75 LBSPH-RS HDG Roller Shaft measures 15”...
$18.50
WD-IN
Inside Corners with corner gussets are used as an inside backup for the Outside Corner hardware. The corner gusset provides strength and helps reduce racking. Weight: 6 LBS
Sold individually.
$4.50
WD-B
5" x 5" x 1/4" Backup Plates are used to backup Single T Female (WD-TF) and Single T Male (WD-TM) connectors. The backup is also used for backing Chain Retainers (WD-CR). Weight: 1.75 LBS
Sold individually.
$17.00
WD-E
Outside Corner Ends are used at the end of docks, ends of finger docks, swim floats corners, or when plain ends are needed. Weight: 7 LBS
Sold individually.
from
$1.00
F-CB515 — F-CB385
Used with wood dock hardware and Simple Dock components1/2" Standard and Heavy Duty hardware3/8" Simple Dock
hardware
Comes with bolt, flat washer, and nut
$17.50
WD-TF
Has two 1/2" tabs and is used with Outside Corner Male (WD-M) or Single T Male (WD-TM) connectors. Can be bolted to a seawall for hinging ramps or to the side of a dock for finger attachment. Weight: 3.5 LBS
$4.50
WD-A
Used for attaching cross stringers to side stringers. Two Washer Plates (WD-W) are used with each Angle to sandwich lumber and provide a solid connection. Weight: 1.75 LBS
Sold individually.
from
$171.50
PH-H10R — PH-H18R
External hoop pile guide with a rubber roller. Available size options range from 10" to 18" sizes. Price changes depending on the size selected. 1/4” galvanized steel bracket 4”x4” inside bend Schedule 40 pipe 1 1/2” diameter Stub shafts welded to bracket are 1 3/8” thick by 3” long (...
from
$6.50
WD-HOPH3 — WD-HOPH3B
Weight: 8.00 LBS - 3 inch Pipe Holder Weight: 2.00 LBS - Backup Plate
Use with 1-1/2" or 2" Pipe
NOTE: Pipe holder and backup plate must be purchased separately below. They do not come as a pair.
$25.00
WD-M
Has one 1.75" tab and is used with Outside Corner Female (WD-F) or Single T Female (WD-TF) connectors. The tabs are pre-drilled to accommodate a 3/4" pin or bolt. Weight: 8 LBS
Sold individually.
$2.00
WD-W
Washer Plates are used with Angles (WD-A) and Cleat Angles (WD-CA). The wood is sandwiched between the steel providing greater strength. Weight: 0.50 LBS
Sold individually.
$14.50
WD-TM
Has one 3/4" tab and is used with Outside Corner Female (WD-F) or Single T Female (WD-TF) connectors. The tabs are pre-drilled to accommodate a 3/4" pin or bolt. Weight: 3 LBS
$28.50
WD-F
Has two 2.5" tabs and is used with Outside Corner Male (WD-M) or Single T Male (WD-TM) connectors. The tabs are pre-drilled to accomodate a 3/4" pin or bolt. Weight: 8.5 LBS
Sold individually.
$126.00
E-2412
The outer shells of all AMD Floats are manufactured from 100% Virgin Prime-Grade Polyethylene and filled with molded-in-place 100% virgin 1pcf Expanded Polystyrene. Black is the standard float color. All buoyancy ratings have been tank-tested. SUPPORT - 380 lbs. WEIGHT - 30 lbs. This product has a FIFTEEN-YEAR WarrantyCLICK HERE for...
$22.50
VRR-CB — VRR-CW
10" x 10" Corner bumper Available in colors Black or White
from
$23.50
VRR-W01 — VRR-B01
10' long rubrail in Style 01
VRR-W01
10 feet - 10 LBS
VRR-B01
10 feet - 10 LBS
Recommended 30 screws or nails per 10 ft. piece each.
from
$4.50
WD-PH27 — WD-B
Securely attaches your 1.5" pipe upright to the dock framing. Use these and our handrail fittings and 1.5" pipe to make handrail. Pipe sold separately. Weight: 3.00 LBS - Pipe Holder with Set Screws Weight: 1.00 LBS - Backup Plate WD-B
Use with 1-1/2" Pipe
Sold individually.
from
$107.50
PH-H10 — PH-H18
External hoop pile guide with NO rollers. Available size options range from 10" to 18" sizes. Price changes depending on the size selected. PH-H10 - 10 inch - 20 LBS PH-H12 - 12 inch - 23 LBS PH-H14 - 14 inch - 25 LBS PH-H16 - 16 inch - 26 LBS...
from
$176.50
PH-H10RP — PH-H18RP
External hoop pile guide with a poly roller. Available size options range from 10" to 18" sizes. Price changes depending on the size selected. 1/4” galvanized steel bracket 4”x4” inside bend Schedule 40 pipe 1 1/2” diameter Stub shafts welded to bracket are 1 3/8” thick by 3” long (...
from
$29.50
PH-L6 — PH-LPR
Light Duty Hoops are an alternate option when our Heavy Duty Hoops are not needed. Hoops are made from 1-1/2" schedule 40 galvanized pipe connected to a "T" bracket with stainless steel fasteners (both included). Hoop is very durable and is designed to be easily removed while bracket stays on...
$125.00
E-2408F
SUPPORT - 225 lbs.WEIGHT - 31 lbs.
This product has a FIFTEEN-YEAR WarrantyCLICK HERE for details on the warranty
from
$1,987.00
KY-LND — KY-LCD
Our residential Kayak Launch Dock is perfect for mounting beside your floating or stationary dock in order to create an easier and safer way to enter and exit your kayak, canoe, or other non-powered watercraft. Kayak kit comes with (4) low-profile 8” tall float drums, aluminum subframe, aluminum grab rail,...
from
$13.00
C-8-M — C-14-M
Our cleats are made from malleable iron and are hot-dipped galvanized. The 8" steel cleat uses a 5/16" bolt.The 10" and 12" steel cleats use a 3/8" bolt.The 14" steel cleat uses a 1/2" bolt.C-6-M - 6" Steel Cleat - 1.00 LBSC-8-M - 8" Steel Cleat - 1.50 LBSC-10-M - 10"...
