Summer is almost here. You know what that means: it’s time for summer projects! That’s right, people; get ready to bust out the lawnmowers and throw on those gardening gloves. You have to take advantage of the nice weather while it’s here.
Another task to tackle is building a floating dock that the kids can jump off of and you can park the boat. These helpful tips for building a dock with float drums will prove that the job isn’t as challenging as you’d think.
Another task to tackle is building a floating dock that the kids can jump off of and you can park the boat. These helpful tips for building a dock with float drums will prove that the job isn’t as challenging as you’d think.
Measuring, Cutting, and Laying Down the Lumber
Lumber is the most essential part of a boat dock. It’ll create the foundation and flooring. As a result, you’ll need plenty of it, and you must measure it correctly.
Make sure to have your cutting and measuring supplies ready. The size depends on your preference, but everything must be even. Once you’ve created the frame, you can start laying down the floorboards. Our best tip: place a piece of lumber in the middle of the frame while you’re laying the floor so that the sides don’t come off the ground.
Make sure to have your cutting and measuring supplies ready. The size depends on your preference, but everything must be even. Once you’ve created the frame, you can start laying down the floorboards. Our best tip: place a piece of lumber in the middle of the frame while you’re laying the floor so that the sides don’t come off the ground.
Connectors and the Importance of Spacing
Laying down the floorboards is a relatively simple task, but there are a few things you should keep in mind. For example, don’t lay down every floorboard initially. Measure about a foot back from the top and the bottom to ensure there’s enough room for the brackets and connectors. Once you’ve done this, flip the dock over to attach the floatation drums to the base.
The Final Touches
There are a few final steps to creating a dock with float drums. You want to secure the floatation drums to the wooden base to ensure they don’t move around in the water. Finally, you’ll need a little more manpower to flip the dock over again and place it in the water. Make sure everyone has a solid hold on the dock so that no one gets stuck underneath it. You may also want to attach the dock to the land via rope or place cinderblocks on the bottom so that nothing moves.
These helpful tips for building a dock will floating drums will assist you when you decide to take on the project. Building a floating dock takes a lot of strength and time, so pack your patience. Remember, you can find everything you need at American Muscle Docks and Fabrication. Our floatation drums will serve as sturdy bases for whatever you create. So roll up your sleeves—summer’s around the corner, so it’s time to get to work.
These helpful tips for building a dock will floating drums will assist you when you decide to take on the project. Building a floating dock takes a lot of strength and time, so pack your patience. Remember, you can find everything you need at American Muscle Docks and Fabrication. Our floatation drums will serve as sturdy bases for whatever you create. So roll up your sleeves—summer’s around the corner, so it’s time to get to work.
