Hardware 82 Products
from
$107.50
PH-H10 — PH-H18
External hoop pile guide with NO rollers. Available size options range from 10" to 18" sizes. Price changes depending on the size selected. PH-H10 - 10 inch - 20 LBS PH-H12 - 12 inch - 23 LBS PH-H14 - 14 inch - 25 LBS PH-H16 - 16 inch - 26 LBS...
from
$171.50
PH-H10R — PH-H18R
External hoop pile guide with a rubber roller. Available size options range from 10" to 18" sizes. Price changes depending on the size selected. 1/4” galvanized steel bracket 4”x4” inside bend Schedule 40 pipe 1 1/2” diameter Stub shafts welded to bracket are 1 3/8” thick by 3” long (...
from
$394.00
PH-HSRP14 — PH-HSRP16
External square hoop pile guide that includes FOUR poly rollers. Available in sizes 14" and 16". Price changes depending on size selected. PH-HSRP14 - 14 inch - 78 LBS - Use with 12" Piling PH-HSRP16 - 16 inch - 81 LBS - Use with 14" Piling
from
$352.00
PH-HSR14 — PH-HSR16
External square hoop pile guide that includes FOUR rubber rollers. Available in sizes 14" and 16". Price changes depending on size selected. PH-HSR14 - 14 inch - 81 LBS - Use with 12" Piling PH-HSR16 - 16 inch - 84 LBS - Use with 14" Piling
from
$131.50
PH-S10 — PH-S18
Internal square pile guide with NO rollers. Available size options range from 10" and 18" heights. Price changes depending on the size selected. PH-S10 - 10 inch - 30 LBS PH-S12 - 12 inch - 33 LBS PH-S14 - 14 inch - 43 LBS PH-S16 - 16 inch - 50...
from
$372.00
PH-SR14 — PH-SR18
Internal square pile guide that includes FOUR rubber rollers. Available size options range from 14" and 18" heights. Price changes depending on the size selected. PH-SR14 - 14 inch - 90 LBS PH-SR18 - 18 inch - 95 LBS
from
$397.00
PH-SRP12 — PH-SRP16
Internal square pile guide that includes FOUR poly rollers. Available size options range from 14" and 18" heights. Price changes depending on the size selected. PH-SRP12 - 12 inch - 87 LBS PH-SRP16 - 16 inch - 95 LBS
from
$1.50
PH-BRR — F-HC16
Replacement parts for Pile Guides PH-BRR - 11 1/2" x 3 1/2" Rubber Roller - 3.5 LBS PH-WRP - 11 5/8" x 3 1/8" UHMW Roller - 2.5 LBS PH-RS - HDG Roller Shaft - 5.5 LBS F-HC16 - Galvanized Hitch Clip - 0.75 LBSPH-RS HDG Roller Shaft measures 15”...
from
$39.00
A-STM — A-STF
This is an affordable alternative to piling. Using our two Stiff Arm fittings you can make a stiffarm using 2" pipe. Each fitting thru bolts into a 2" pipe. The WD-STM thru bolts into each end of a 2" pipe and the WD-STF bolts into 2" pipe in the ground...
from
$263.50
STF-H3 — STF-H8
Allows additional movement for greater water fluctuation. Designed for strength, these taper truss hinge connectors provide a smooth deck surface while allowing the dock to hinge up and down. The hinge is hot-dipped galvanized to ensure maximum service. Connects with wood dock male and female hardware (WD-TM and WD-TF) STF-H3...
from
$176.50
PH-H10RP — PH-H18RP
External hoop pile guide with a poly roller. Available size options range from 10" to 18" sizes. Price changes depending on the size selected. 1/4” galvanized steel bracket 4”x4” inside bend Schedule 40 pipe 1 1/2” diameter Stub shafts welded to bracket are 1 3/8” thick by 3” long (...
$17.00
WD-E
Outside Corner Ends are used at the end of docks, ends of finger docks, swim floats corners, or when plain ends are needed. Weight: 7 LBS
Sold individually.
$28.50
WD-F
Has two 2.5" tabs and is used with Outside Corner Male (WD-M) or Single T Male (WD-TM) connectors. The tabs are pre-drilled to accomodate a 3/4" pin or bolt. Weight: 8.5 LBS
Sold individually.
$18.50
WD-IN
Inside Corners with corner gussets are used as an inside backup for the Outside Corner hardware. The corner gusset provides strength and helps reduce racking. Weight: 6 LBS
Sold individually.
$25.00
WD-M
Has one 1.75" tab and is used with Outside Corner Female (WD-F) or Single T Female (WD-TF) connectors. The tabs are pre-drilled to accommodate a 3/4" pin or bolt. Weight: 8 LBS
Sold individually.
$36.50
WD-INPH3
Can be used to replace a standard inside corner. Has a 3" I.D. pipe welded into the corner providing internal anchoring. Accommodates 2" pipe. Weight: 17 LBS
Sold individually.
$14.50
WD-TM
Has one 3/4" tab and is used with Outside Corner Female (WD-F) or Single T Female (WD-TF) connectors. The tabs are pre-drilled to accommodate a 3/4" pin or bolt. Weight: 3 LBS
$17.50
WD-TF
Has two 1/2" tabs and is used with Outside Corner Male (WD-M) or Single T Male (WD-TM) connectors. Can be bolted to a seawall for hinging ramps or to the side of a dock for finger attachment. Weight: 3.5 LBS
$4.50
WD-B
5" x 5" x 1/4" Backup Plates are used to backup Single T Female (WD-TF) and Single T Male (WD-TM) connectors. The backup is also used for backing Chain Retainers (WD-CR). Weight: 1.75 LBS
Sold individually.
$4.50
WD-A
Used for attaching cross stringers to side stringers. Two Washer Plates (WD-W) are used with each Angle to sandwich lumber and provide a solid connection. Weight: 1.75 LBS
Sold individually.
$2.00
WD-W
Washer Plates are used with Angles (WD-A) and Cleat Angles (WD-CA). The wood is sandwiched between the steel providing greater strength. Weight: 0.50 LBS
Sold individually.
$12.50
WD-CR
These are typically bolted to the side of the dock or to a cross stringer and can accommodate up to 1/2" chain to hold the dock in place. Use a WD-B as a backup plate. There is also an XL Chain Retainer available. Weight: 3.75 LBS
Sold individually.
$6.50
WD-CA
The Cleat Angle is bolted to the inside of the side stringer and uses a WD-W washer plate as a back up. The cleat is bolted through the deck and through the cleat angle. The slotted holes allow for various size cleats to be used. This cleat assembly ties your...
$7.50
WD-CAXL
The XL Cleat Angle is for cleats larger than 12". The Cleat Angle is bolted to the inside of the side stringer and uses a WD-W washer plate as a back up. The cleat is bolted through the deck and through the cleat angle. The slotted holes allow for various...
